Over the years I have heard
many accounts of how tough Leicas are.
The most memorable one that sticks in my mind is of a photographer who
took his Leicaflex SL2 along on a ride in an Air Force fighter jet. As it turned out, the jet developed problems
and he and the pilot had to bail out.
When the parachute opened, the sudden deceleration caused the camera
slip out of the photographer’s hands. It
fell several thousand feet to the Mojave Desert. It wasn’t until a year later that a hiker
found the camera. The camera back had
remained closed which allowed for the film to be removed and developed. With the help of the pictures the original
owner of the camera could be found. He
in turn sent the camera to Leitz (Leica).
They determined that it actually could be repaired but decided to keep
it in its battered condition and offered the photographer a new one in
exchange. The camera had apparently
fallen in an angle onto the lens with the result that the lens mount of the
camera had been pushed far into the camera housing on one side. I saw the camera in the Leica museum at Leica
Camera. It definitely looked sick.
But not all accounts of Leica
toughness are this extreme. Here is an
account by Bob Nandell, a former staff photographer for the Des Moines Register. He wrote:
“It was what every photographer dreads.
One minute I was driving along looking for harvest
pictures with my Leica R3, an R3-Mot, a 250mm f/4 and a 400mm f/6.8 Telyt
nestled on the seat beside me, ready for color or black and white.
An instant later, after taking the ditch to avoid
collision with a truck, my car was upside down.
After getting out of the seatbelt and hastily exiting
the car, to my astonishment I was not badly hurt. But what about the cameras?
The gadgets bag with 35, 50, 135 and 19mm R lenses
nestled in its pockets was fine. It had
been in the foot-well.
The R3 with the 250mm attached was in a sea of mud and
glass that had been the windshield. The
R3-Mot and the 400mm were next to the roof, also in mud.
Disaster? Not so.
A quick inspection showed that the bodies were functional. In fact, I took photos for insurance purposes
at the scene with the R3-Mot.
Back home again, I found that the all equipment was
useable. The meters worked, the lenses
worked, the motor worked. The thick
plastic lens covers, which Leitz supplies, had saved the glass in both
lenses. Both lenses were shipped off for
tightening and cosmetic repair, and a few pieces, such as a replacement for a
bent rewind knob, were ordered.
Tough
Camera Tough
Photographer
The cameras, although battered like their owner, had
survived. In fact, on the way home from
the accident scene, the badly scratched R3 produced a nice color harvest
picture, which had been the original goal of the day.
I had purchased Leicas for their value and durability.
I know the list can now include indestructability.”
To this I can add a personal
account. I was shooting an architecture
assignment for a client. As with most of
this type of photography, especially indoors with available light, I used a
tripod. This tripod is a rather compact
Gitzo model for easier transport, about 3 feet tall without any of the legs
extended. I have no idea how this
happened, but trying to attach the camera, a Leica Digilux 2, it slipped out of
my hand and fell at least three feet down onto a concrete floor. That makes a rather ugly sound. I picked the camera up, quickly checked its
functions and proceeded to shoot the assignment. All worked well and the camera has continued to
work without any flaws to this day.
Even though the era of the
space shuttle has come to an end, there still is a certain fascination with the
achievement of the shuttle program.
Below is an account of one of the launches where the only useable photographs
were made with Leica equipment.
From Leica Quarterly October
1982
Several hundred press
photographers were present at Cape Canaveral for the fourth flight of the space
shuttle Columbia. At the cape NASA will
not permit photographers any nearer than three miles from the launch pad,
because of the enormous power generated during the launch. When the space shuttle takes off, it
generates seven million horsepower, a noise level 1,000 times louder than a 747
and a temperature of 6000ᵒF. However,
remotely controlled cameras are allowed within 1,000 yards of the pad. The area in which the cameras are located is
a swampy one.
It was there that David M.
Tenenbaum, Photographer for the Associated Press, placed his Leica R4 with APO
Telyt-R 180mm lens, along with two other 35mm SLRs. In the company of all the other press
photographers, Tenenbaum set up his cameras the day before the launch. About an hour after everybody had arranged
their remote camera installations, Cape Canaveral was hit by a ferocious thunderstorm
with 50 mph winds, hail and torrential rain.
When the storm was over
Tenenbaum and his fellow photographers went out to check their cameras. He recalls, “The water level was about eight
inches higher than just three hours before.
And my tripod with the remote control box and three cameras all wrapped
up in plastic was blown over and lying in the swamp water.” After drying off the cameras, only one of
them, the Leica R4, still worked and showed no evidence of water in the
lens. Tenenbaum replaced the other two
cameras with a Leicaflex SL MOT and another 35mm camera.
It rained again briefly
before the launch but all else went well.
When Tenenbaum recovered his cameras all had triggered properly. Both Leicas were fine; the other camera had condensation
in the lens. The Leica photos were
excellent and were widely published. As
Tenenbaum reports, “Of all the cameras AP had access to, my Leicas made the
only useable negatives.” Thirteen of the
other camera makes were damaged, some beyond repair.
“Total damage to the press
corps cameras had to be beyond $100,000.
And my R4 and Leicaflex had no problems and no lens condensation.” Every non-Leitz lens he examined experienced
condensation between the lens elements.
Tenenbaum sums up his
experience: “It was nice to have the occasion to clearly see the advantage of
Leitz gear and the edge it gave me over everyone else…
Photo: David Tenenbaum
The US armed forces
apparently are familiar with the toughness of Leica cameras as well. The US Air Force, for their top 35mm camera,
used the Leicaflex for many years, and that a special production run of Leica
M4s, dubbed the KE-7A, was made for the US Army?
Leica KE-7A
The KE-7A was accompanied by
a special instruction book which even included a special section on how to
destroy the camera in case of capture by the enemy. It was an intriguing process. The first suggestion was simply to try to
break it with a hammer, shovel, or other blunt instrument. Apparently they realized how well built the
cameras were, because the instructions continued, saying that if none of the
first methods succeeded, to use explosives like dynamite.
I know Leicas are quite
tough, but dynamite?
------------------------------------------------------------------------------------------------------------------------------------------
DON'T FORGET TO SEND IN YOUR ENTRIES
LEICA Barnack Berek Blog PHOTOGRAPHY CONTEST
For more information click here
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Upcoming shows in Tamarkin's Rangefinder Gallery
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What is the lens on the KE7-A?
ReplyDeleteIt is a special f/2 version of the Leitz 50mm Elmar, made at the ELCAN (Ernst Leitz Canada) plant in Midland, Ontario.
Delete