No digital camera makes it as
easy as the Leica M8 to use infrared light to create surreal pictures that
stand out in radiantly bright green leafs in extreme contrast of a dark sky,
for example. As is known, the barrier
filter of the sensor cover glass is very weak for design-related reasons. Therefore an additional blocking filter is
always recommended for normal photography to avoid a magenta cast of skin tones
or black textiles. The M9, ME and M monochrome are also ideal to create the
effects of long light waves.
For this nothing more is
necessary than an infrared filter like the B + W IR 093 Black Red 830 F
PRO. All B + W filters are made from
high quality optically ground and finely polished, plane-parallel and
streak-free glass.
The filter blocks out all
visible light, resulting in pure infrared photographs. Light transmission starts at a wavelength of
800 nm with just 1 percent and rises at 900 nm to 88 percent.
Since infrared filters have a
very large exposure factor and therefore require long exposure times, it is
always recommended to use a stable tripod.
Automatic exposure control should not be used because the exposure meter
is calibrated for visible light only.
The optimum exposure values can best be determined through a series of
tests. The distance settings require some practice as well. As a rule of thumb for infinity focus under
IR conditions multiply the focal length by 300.
For example, for a 50 mm lens that is 15 meters.
These filters are available
in sizes E39, E46, E49, and E55.
For sample images go here
To comment or to read comments please scroll past the ads below.
-------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
For more information on KOMARU and for orders go to: www.taos-photographic.com
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
For more information and pre orders go to: www.lenstab.com
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Saturday June 20 is Leica Day at Tamarkin Camera !
Upcoming shows in Tamarkin's Rangefinder Gallery
Looking Back On It - Photographs by Jay King
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Inventive Camera Bags for All of Your Gear
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Click on image to enlarge
Order: info@gmpphoto.com
Please make payment via PayPal to GMP Photography
Click on image to enlarge
Order: info@gmpphoto.com
Please make payment via PayPal to GMP Photography
Click on image to enlarge
Order: info@gmpphoto.com
Please make payment via PayPal to GMP Photography
So all I have to do is use an infrared filter like the B+W on my M8 and I will get results like these?
ReplyDeleteBasically, yes. However, don't forget to make a series of MANUAL test exposures since the meter of the camera is calibrated for visible light only. In addition, keep in mind that you need to compensate for the focus shift with infrared light. The infinity focus position, as the article mentions, is 300 times the focal length. This comes out to the 15 meter setting for a 50mm lens.
DeleteAre there any lenses which don't require refocusing with infrared?
ReplyDeleteYes, but very few. The Leica 180mm f/3.4 Apo Telyt-R is such a lens. It is corrected for not just the visible spectrum but for infrared also. It does not need to be refocused when used with infrared.
DeleteCould that lens be used on an M8?
DeleteYes, with an adapter that converts the Leica R mount to the M mount. However, since the M8 has no live view provision, the lens would have to be focused manually. since there is no focus shift, it is relatively easy to focus the lens manually by utilizing the depth of field scale.
DeleteYes, as long as you compensate for the focus shift. With a 50mm lens, for instance, you would set the 15 meter mark opposite the aperture you are using on the depth of field scale instead of the infinity mark. The same aperture on the other end of the depth of field scale will then indicate your minimum focus distance.
DeleteThank you very much. That is very useful information.
DeleteWhat would happen if I use a filter with not as high a cut off as the B+W filter that you describe in the article?
ReplyDeleteYou would get less of the infrared effect because part of your exposure would be from the visible spectrum.
DeleteWould that be the case with a dark red filter?
DeleteIs 15 meters the same as 45 feet?
ReplyDeleteNo, it's about 50 feet.
DeleteIsn't the 300 times the focal length just a ballpark figure and is there a more accurate way to focus my lenses with infrared?
ReplyDeleteYes, it is. Of course the most accurate means would be to find out the focus shift of your lenses. Another means to increase focusing accuracy is to use the depth of field scale with the next larger aperture. For instance, if you are shooting at f/8, apply the focus settings on the depth of field scale for f/5.6 or even f/4. That should make up for any focusing errors that otherwise might occur.
DeleteBut f/5.6 or f/4 have less depth of field than f/8. Wouldn't that increase any potential focus errors?
DeleteNo. Please keep in mind that with the above example, you are actually shooting at f/8. You only apply the f/5.6 or f/4 depth of field scales.
DeleteGot it! Thanks.
DeleteI am confused. Why can't you use the rangefinder?
ReplyDeleteThink back a bit to physics class in high school. When light transmits through a prism, it is split up into the spectral colors with red on one side and blue on the other. The same thing happens when light transmits through a single lens element, like a magnifying glass. With other words, regardless how you focus that lens, some of the "rainbow" colors will focus in front and some in back of the focal point, which is always your sensor or your film. Lens designers have learned to eliminate that problem by using more than one glass element in our lenses. This allows the lenses to focus all the visible light such that there are no out of focus parts. This is relatively difficult to do for light of the visible spectrum, and therefore infrared (and ultra violet) usually are being ignored. Films generally are not sensitive to infrared light and sensors are made such that they don't record infrared either. Since the Leica M8 and follow up models have a certain infrared sensitivity, we can take advantage of that and take photographs with infrared light. However, since most lenses are not corrected for infrared light, we are faced with the problem that infrared light comes into focus in back of the plane of focus of the visible spectrum and thus would render out of focus images and since the rangefinder of the Leica cameras is designed for the visible light of the spectrum, it would render infrared images to be out of focus. Therefore we need to compensate for that with the above described methods.
DeleteEugene Nikiforov wrote elsewhere: This is partially wrong information, with Leica M8 you can do infrared photos, since there is no internal AA (anti aliasing) filter. With Leica M9 & Monochrom it's not practical, since AA filter is present, resulting images will be unusable
ReplyDeleteIt appears that your assessment of the AA filter preventing infrared sensitivity is not correct. See: http://blog.leica-camera.com/photographers/blog-contributors/david-english/david-english-infrared-monochrom/, where the author published a large number of infrared photographs taken with the Leica M Monochrom. If the AA filter obviously does not prevent infrared photography, why would it with the M9, especially since both cameras have the same sensor, the only difference being that the M Monochrom does not use a Bayer filter.
DeleteEugene Nikiforov answered: Heinz Richter Let me try to explain it. M8 does not have AA filter, which allows you to shoot at base ISO 160 and relatively fast speed (3-4 seconds) at apertures between 5.6-11, which gets you sharp and noise free image. With M9 your shutter speed will be 3-4x longer and infrared effect is not the same, since AA filter is present, with longer shutter speed, it allows for some infrared light to pass but not enough. The Article you refer with regards to Monochrome, is different, David tries to compensate presence of AA filter with fast lenses & fast ISO, which is a bad idea, as you will get a lot of noise in your image
DeleteMaybe, but that does not constitute "unusable" images as you state in your initial; comment. Besides, I don't think the noise level in the photographs of David's article is not objectionable at all.
DeleteI'm curious if you can use a IR lens on the Leica Q? Or the XVario? Anything advice would be helpful
ReplyDeleteThank you
Are you referring to an infrared Lens? If so, I am not aware of any specific infrared lenses. all lenses do transmit infrared light. However, to photograph just in the infrared spectrum, it is necessary to use an infrared filter which allows only the infrared portion of the spectrum to transmit. As far as the Leica Q and the Leica X Vario are concerned, their sensors do not display any great infrared sensitivity and would need to be modified to be useful for infrared photography. Otherwise, exposures, even in daylight, would become exceedingly long. The only digital Leica with a useful infrared sensitivity is the Leica M8/M8.2. Both cameras do work well with the use of an infrared filter.
Delete