Pages

Tuesday, June 27, 2023

RANGEFINDER FOCUSING IN AN AUTOFOCUS WORLD




By Heinz Richter

The late models of the Leica M camera line are often criticized for not offering autofocusing.  It is certainly correct that a line of autofocus lenses would eliminate any of those criticisms.  But is the lack of autofocus really such a hindrance?

With the advent of autofocus one little trick to speed up focusing of our cameras has all but been forgotten.  I am talking about hyperfocal  lens settings with the help of a depth of field scale.  Most lenses available today no longer have depth of field scales and thus make focusing via hyperfocal settings impossible.  Fortunately, most Leica lenses still offer this advantage and its application can overcome the lack of autofocus to quite an extend.

A lens can only be accurately focused at one certain distance.  Everything before and after that point of focus is effectively out of focus.  Yet we all know that the pictures we take show scenes and subjects to be sharply in focus over a considerable distance.  Are our books of physics wrong?  Not at all.  The reason for this apparent contradiction is our eyes.  Fortunately they aren't good enough to recognize out of focus areas in our pictures unless they reach a certain level.

Imagine photographing a small point.  When not properly in focus, this point will become larger and show up as a fuzzy disc.  This disc has to be of a certain size before our eyes recognize it as out of focus.  This representation of a point is referred to as the circle of confusion.

In these days of virtually everything being auto focus we rarely pay any attention to focusing anymore.  As a matter of fact, many outsiders consider the Leica M rangefinder cameras with their manually focusing lenses an anachronism.  Yet in quite a variety of situations these lenses can be focused as fast or faster than any auto focus system.

That is because the vast majority of the Leica M lenses are non-zoom lenses.  That is the reason why to this day all of them have a depth of field scale.  Many photographers and picture takers have no idea what a depth of field scale is, and if they do, they rarely know what to with it.

It is a known fact that the aperture setting on our lenses, the f-stop used to take a picture, determines how much of what we photograph will be in focus, how much depth of field there will be.  The smaller the aperture, the more depth of field.  That is what a depth of field scale is all about.  It will show the distance from the point closest to the camera to the point furthest from the camera that will be in focus.

 
Increase of depth of field by decreasing aperture size

Effectively one third of the total depth of field will be in front of the point of focus and two thirds will be beyond it.  If applied correctly, this can actually greatly improve the sharpness of our photographs.  Imagine taking a picture of a mountain scene.  The mountains are obviously far enough away to constitute infinity as far as the focus settings on our lenses are concerned.  Subsequently it seems to make sense to set our lenses to infinity to make sure the mountains are in focus.  As a matter of fact, if we use the rangefinder on a Leica, this is exactly what will happen.

However, let’s remember the above rule which states that two third of the depth of field is beyond the point of focus.  That means in our mountain scene, two thirds of the depth of field will be wasted.  The depth of field scale will help to prevent that, if properly applied.

Our exposure settings will always be a combination of shutter speed and aperture.  Once we or the camera determine the correct exposure settings, we will know what aperture the picture will be taken with.  Back to our mountain scene.  Instead of setting the infinity mark opposite the focus mark on the lens, all that needs to be done is to set the infinity mark opposite the marking of the aperture we are using.  That will still give proper focus to infinity, but it will greatly increase sharpness in the areas closer to the camera as indicated by the other aperture mark on the depth of field scale.

 
Above focused on the background
Below focused on the foreground

 
Focused at hyperfocal setting with one third in focus in front of the point of focusand two thirds behind the point of focus
Picture examples form "Kleines Leica Buch (Little Leica Book), 1952 edition

 
In this example, the boy flying his kite is obviously the main subject and therefore
should be in focus. However, focusing on him would most likely render the
background out of focus. Utilizing the depth of field scale assured that all is in focus.

It is a fact that the smaller the aperture, the more depth of field we will have.  But we shouldn’t indiscriminately use the smallest aperture all the time, because this can easily lead to the necessity of too slow a shutter speed which in turn can lead to blurry pictures because of camera movement.

As I explained above, the circle of confusion determines what detail in our pictures appears in focus and which not.  Unfortunately, the size of the circle of confusion must also be based on a certain picture size.  In most cases that is an approximate enlargement of five times or a 5 x 7 inch enlargement from a 35mm negative or full frame digital sensor.  With other words, up to a 5 x 7 inch size enlargement our pictures will display maximum sharpness and maximum depth of field.

But what about enlargement greater than a 5 x 7 or if considerable cropping is necessary?  Does that mean the depth of field scale on our lenses is useless?  Not at all.  All we need to do is use the depth of field settings on the lens with an aperture one or two stops larger than the aperture in actual use.  With enlargements of 8 x 10 or 11 x 14, the next larger aperture will usually be sufficient.  If the enlargement size is greater than that, use a two stop larger aperture.  With other words, if the aperture used is f/11, use the apertures of f/8 or f/5.6 on the depth of field scale.

Why do all of this instead of just using the rangefinder and focus on our main subject?  Because you can greatly increase your speed of operating the camera.  Using the depth of field scale and setting the lens as explained above, using hyperfocal setting, will eliminate the need to focus altogether and thus make the operational speed of your camera that much greater.

The above figures are based on 35mm size negatives or full frame digital sensors.  Larger or smaller negative and sensor sizes will lead to different depth of field.  Different focal lengths of our lenses will do the same.  In general, the shorter the focal length the more depth of field there will be.  This, however, is nothing to worry about because the depth of field scales will reflect that.

What about the opposite?  What if we want to minimize depth of field, to make sure the background is out of focus? Here too the depth of field scale can be of help just as well.  If using a smaller aperture will lead to a greater depth of field, it stands to reason that a larger aperture will do the opposite.  The depth of field scale will once again display the range of focus from the point closest to the camera to the one furthest from the camera.

Give it a try.  You might very well find that your pictures in some cases will display a greater range of sharpness and you will be able to use your camera a lot quicker.  It might very well be the difference of being able to catch a great moment on film or memory card instead of losing it to your camera being too slow.


For other articles on this blog please click on Blog Archive in the column to the right

To comment or to read comments please scroll past the ads below.

All ads present items of interest to Leica owners.

_______________________________________________________________________

EDDYCAM - the first and only ergonomic elk-skin camera strap     
 www.eddycam.com        

      


Click on image to enlarge
Please make payment via PayPal to GMP Photography

Click on image to enlarge
Please make payment via PayPal to GMP Photography

Click on image to enlarge
Please make payment via PayPal to GMP Photography



11 comments:

  1. Isn't this kind of awkward?

    ReplyDelete
    Replies
    1. Not really, because you do this only once and then just compose and shoot.
      I often use a 15mm lens. I always use hyperfocal settings. Even wide open the depth of field ranges from 3 feet to infinity. This increases to 1.5 feet to infinity at f/8 and 0.5 feet to infinity at f/16, meaning that in virtually all shooting situations I can literally point and shoot with no focusing problems at all.

      Delete
  2. Isn't this a rather outdated approach and primarily an excuse for the lack of autofocus?

    ReplyDelete
    Replies
    1. But wouldn't the addition of autofocus elevate the Leica M cameras even further? After all, you have written about this being the one thing that is missing when comparing the M cameras to the competition.

      Delete
    2. Of course it would. But we must not overestimate the importance of autofocus. This article was meant to show that perceived lack of fast focusing with non-autofocus lenses can easily be overcome by applying hyperfocal settings.
      But we must also not forget that autofocusing on an M camera would inevitably mean an increase of lens size to accommodate the autofocus mechanisms, thus eliminating one of the advantages of the Leica M system

      Delete
  3. I don't recognize the Leica camera on top of the article.

    ReplyDelete
    Replies
    1. The picture is of the Leica M Red, a special edition model designed by Jony Ive and Mark Newson of Apple fame. The camera was created for the RED charity auction being put on by U2’s Bono. It was auctioned off at Sotheby's. Although it was expected to fetch $500,000-$750,000, it wound up selling $1.8 million. The camera was donated by Leica and was auctioned to help the (RED) charity fight AIDS, tuberculosis and malaria.

      Delete
  4. Another great posting. Good photography is thinking photography.....know your tool.

    ReplyDelete
  5. Circle of confusion is a function of the lens, not depth of field. If you have a cropped sensor and blow up the photo, you are also magnifying the circle of confusion: hence, less depth of field.

    ReplyDelete
    Replies
    1. You are perfectly correct. My above answer does not dispute that in any respect. Any time you enlarge an image, you also enlarge the circle of confusion. Sensor size has no influence on that.

      Delete
  6. Thank you for this post! Very informative and well written.

    ReplyDelete