Photo: Marlies Amling
By Heinz Richter
People often wonder if Leica makes their own glass for the manufacture of their lenses. They used to, as a matter of fact, they operated their own glass research lab where they developed many of the exotic types of glasses that are used in their lenses today. However, for a relatively small company, that proved to be unsustainable, and they closed the lab as well as their glass manufacturing operation.
The Leitz Glass Laboratory, which operated until 1989, was the driving force of Dr. Gustav Weissenberg, of the Mineralogical Institute of Marburg, Germany. The Institute grew crystals, and Weissenberg’s idea was for it to create optical glasses as well as to meet the demands by optical designers for high refraction glasses to correct aberrations. He wanted to replace the highly radioactive thorium oxide in existing glasses with an oxide free of thorium. So, in 1949, the Leitz brothers established a glass laboratory within their company to pursue Weissenberg’s research.
After lengthy experimentation the glass laboratory discovered that lanthanum oxide offered the best chances for success. They found that glasses could be created with a refractive index of n 1.7. However, such glasses could not be made in large quantities because their strong propensity for crystallization made it difficult to prevent crystal grooves, or striae. Other substances, such as zirconium oxide, yttrium oxide, and tantalum oxide, had to be incorporated to produce more stable high-refraction glasses in large numbers. Leitz then granted the German company Schott (Schott is part of Zeiss, headquartered in Mainz, Germany) a license to produce the new LaK 9 glass exclusively for Leitz.
Meanwhile, the Leitz optical designers wanted to design lenses that were even faster than f/2, and the dreamed of doubling the speed to f/1.4. This required glasses with refractive indices close to n 1.8, and for this they had to find the right technology. Evaporation at the surface of the molten glass while the high temperature in the crucible is being lowered can easily cause striae, which can only be prevented by stirring to produce constant blending of the molten mass. In order to accomplish this, technicians had to incorporate interference factors, so that one oxide would prevent another from crystallizing. Laborious experiments led to three new types of Leitz optical glass, with refractive indices of ne 1.80 and ne 1.82 and a dispersion value of ny 45. These new types of glass made the design of the 50mm f/1.4 Summilux lens possible
Platinum crucible
Stirring rod
Pouring of molten glass
But for glass types with indices of refraction higher than ne 1.8, it was difficult to obtain enough chemicals with sufficient purity at a reasonable cost. At the time, one kilogram (2.2 lbs.) of 99.99 percent tantalum oxide cost the equivalent of nearly $2000.00 at that time.
In 1966, Leitz introduced the 50mm f/1.2 Noctilux, which incorporated aspherical surfaces. Then years later, it was producing the 50mm f/1.0 Noctilux , which did not involve aspherical surfaces. This was made possible by still another new type of optical glass: one with a higher zirconium oxide content.
The company was seeking a lens with a maximum aperture of f/1.2, for which optical glass with a particularly high index of refraction was necessary. Ultimately, it wanted to double the maximum aperture of the 50mm f/1.4 Summilux lens to f/1.0. The higher zirconium oxide content permitted production of the 900403 glass with a refractive index of ne 1.9005 and a dispersion value of ny 40.
Comparison of optical glasses
The large circled dots indicate glasses used in Leica lenses, the small circled dots indicate Leica glasses not currently in use. The plain dots indicate glasses from other manufacturers
These developments were not without difficulties, however. The new lenses utilized glass with a very high melting point of nearly 1600 C (2912 F). That came close to the melting point of the platinum crucibles. Also, the shape of the stirring tools in relation to the viscosity of the molten glass was important for the homogenization of the glass. So, the temperature of the melt in the crucible had to be lowered considerably before it was poured out. Workers then had to cool the slabs at a carefully controlled rate over 10 to 12 days and nights in order to prevent molecular tension. Furthermore, the glass was still quite susceptible to crystallization.
Another area of investigation at Leitz was correction of chromatic aberrations in apochromatic lenses with long focal lengths. Fluorite, grown in single crystals, possesses such anomalous partial dispersion for correction of the fourth color in optical glass. Leitz competitors like to use these calcium fluorite crystals for lens elements in telephoto lenses, but Leitz did not regard them as suitable for photographic lenses because they have very poor shape retention. Also, because of their low index of refraction of only ne 1.43, the fluorite crystals require strong curvatures, which are disadvantageous. Leitz preferred to search for a true glass with an amorphous structure.
The company discovered that the fluorites remained stable in metaphosphate suspensions. By incorporating several fluorites, it was able to optimize the proportions so as to avoid creation of striae during the cooling process. Eventually it succeeded in developing a true glass with anomalous partial dispersion and a refraction index greater than ne 1.544. With that, Leitz became the first lens maker to manufacture such lenses. The 800mm f/6.3 Telyt-S was such a lens [see blog article “Dancing Bear and his Magic Lens”]. It attracted a great deal of attention at the 1972 Olympic Games in Munich.
A few years later, with the addition of titanium oxide, Leitz was able to produce glass with an anomalous partial dispersion value of ny 66.6 and a refraction index of 1.544. This glass was used in the 180mm f/3.4 APO-Telyt, which ranks to this day as one of the best lenses ever made. Since then, the company has made a large number of lenses with apochromatic correction, and it is creating new ones regularly.
Overall, the Leitz Glass Laboratory developed 35 new glasses from 50,000 experimental melts. For a time, these glasses were used exclusively in Leica lenses. Without the laboratory, in fact, most of the modern lenses of the period 1949 to 1989 would not have been possible. Because of its work, the company produced up to 10 metric tons of glass a year, partially because of close communication between glass researchers and lens designers. Other large glass manufacturers were often behind Leitz/Leica because optical glass is of only minor importance to them. Phototropic glasses, construction glasses, television tubes, baby bottles and the like are their real moneymakers. When these companies do undertake to develop optical glasses, it is only for those for which they anticipate a large demand. It was the exotic wishes of the Leitz Company that permitted it to develop the glasses it did during the 40 years it held sway in this area.
Once it was possible with new technology to derive maximum performance from optical glasses, however, Leica closed the Leitz Glass Laboratory. The growing number of glass manufacturers and new methods of processing glass and manufacturing lens elements also made this desirable from a financial standpoint. However, some of the rare glasses developed by Leitz are still not available to any other lens manufacturer. Instead Leitz has these glasses made exclusively for them by other companies like Schott, for instance. Still, the company looks back with pride to the breakthroughs of the researchers and designers at the laboratory.
For other articles on this blog please click on Blog Archive in the column to the right
For other articles on this blog please click on Blog Archive in the column to the right
To comment or to read comments please scroll past the ads below.
All ads present items of interest to Leica owners.
_______________________________________________________________________
To comment or to read comments please scroll past the ads below.
All ads present items of interest to Leica owners.
_______________________________________________________________________
Buy vintage Leica cameras from America's premier Leica specialist
Buy vintage Leica cameras from
America's premier Leica specialist
Click on image to enlarge
Click on image to enlarge
Click on image to enlarge
Click on image to enlarge
Click on image to enlarge
Click on image to enlarge
Which are the companies that Leica is purchasing glass from?
ReplyDeleteThey are very tight lipped about that. But one company for sure is Schott and it has also been reported that Leica is getting raw glass from Hoya.
DeleteIsn't that compromising their standards?
DeleteNo. Leica is only purchasing raw glass that has been made to their specifications in purity and specs.
DeleteDo you know what those specifications are?
DeleteLeicas specifications and tolerances are much tighter than what is commonly considered to be acceptable. For instance, Leica applies a standard of ±0.0002% for the accuracy of the refractive index. This compares to the international standard of ±0.001% as applied by other lens manufacturers. The accuracy of the Abbe number, the measure for dispersion, is ±0.2% for Leica compared to ±0.8% internationally.
DeleteUnter dem Begriff Rohglas ist bestimmt Optisches Glas gemeint
ReplyDeleteJa, Rohglas welches den Bestimmungen von Leica entspricht, aber sonst nicht weiter verarbeitet worden ist. Wie schon oben erwähnt, Leica erlaubt weitaus weniger Abweichungen wie es allgemein der Fall ist.
Delete