Sunday, September 22, 2019

THE FIRST SUPER WIDE ANGLE LENS FOR LEICA


ZEISS HOLOGON


 
Zeiss Hologon 15mm f/8 on Leica M4-P

Modern lens design techniques have presented us with a relatively large number of super wide angle lenses of 15, 13 and even shorter focal length.  All of them are very complicated, multi element designs in order to avoid visible distortion and lack of sharpness due to under corrected optical aberrations.  These lenses have become actually quite common, and few photographers even remember the super wide lens which started it all.

For many years, 21 and 20mm lenses were the maximum 35mm photography had to offer.  Anything with a wider angle of coverage had to be of a fish eye design with all the draw backs of pronounced barrel distortion.  All of this was changed with the introduction of the Zeiss Hologon 15mm f/8 in the early 1970s.  This was unusual in many respects.  Not only was the Hologon the first lens to achieve the unheard of angle of coverage of 110° without the usual fish eye effect, it was also the first post-war marriage between Leica cameras and Zeiss lenses.

 
Cross section of the three lens elements and the lens position inside the Zeiss Hologon camera body
Note the extreme proximity of the rear lens element to the film plane

The Hologon was initially developed for the Zeiss Hologon camera, which was part of the Zeiss Contarex system.  At the time it was thought impractical to offer the Hologon as an interchangeable lens, even with mirror lock up in the reflex Contarex.  Instead, Zeiss opted for a separate camera body, based on the Contarex with the mirror box removed and with the lens permanently installed.  It was their claim that extremely precise registration and centering was necessary for the lens to perform satisfactorily.

The Leica M cameras also met these criteria and the lens was made available in the Leica M mount also.  It was sold with a special 15mm viewfinder included.  The 15mm Hologon with its undistorted 110° diagonal angle of view is probably one of the most interesting lens designs ever.  Conventional lens design theories would indicate that a lens with such specifications would have to be of a multi-element design.  Computer aided research of wide angle lenses for aerial photography was conducted.  The normal concept of using many thin elements in wide angle lenses was actually revealed as unnecessary.  In fact, only three thick elements proved necessary to assure good performance of the lens.  Subsequently, the Hologon is of a triplet design, although bizarrely shaped.  Thus we have an example of an optical design which would not have been created by using conventional methods.  Furthermore, it is safe to say that manual computations for this design would have literally taken years to complete.

Construction of the lens made the installation of a diaphragm virtually impossible without compromising overall performance.  It was also impossible to offer a speed faster than f/8 for the same reasons, even though some of the modern optical glasses available today might offer the possibility to increase the speed of the Hologon.

It was felt that the restriction of a fixed aperture of f/8 would not pose any great disadvantage.  Besides, a graduated neutral density filter, offering perfectly even illumination across the entire image area, would effectively render a speed equivalent of f/16.  This could also be used in situations where the standard f/8 aperture would lead to overexposure.

Since the Hologon lens renders virtually distortion free images, the camera should be used perfectly level, to avoid excessively converging lines on verticals.  For that reason the 15mm viewfinder had a built-in spirit level, which helped the photographer keep the camera level, especially when shooting hand held.

The ability of an extremely wide angle lens to render virtually distortion free images allow the photographer to shoot many photographs where it is impossible to tell that an extremely wide angle lens was used.  But this is only one of the advantages of such a lens.  The other is that it produces photographs with a rather different perspective.  It is important to pay special attention to the foreground since the extreme angle of coverage will show a considerable amount of foreground when the camera is held level, even when used horizontally.  It is also important to hold a camera with such a lens very carefully.  It is quite easy for the lens to pick up ones knuckles.

The Hologon was designed to render optimum performance at f/8 across the entire image area.  Due to the optical glasses available at the time of its design, the lens did not quite show the high contrast level typically associated with the high quality optics from Zeiss.  In practical terms, this will result in perfectly sharp enlargement up to 8x10 inches.  Bigger enlargements might show a certain lack of crispness when inspected very closely.  Projection of transparencies, on the other hand, will show no adverse effects, because the projected images usually are not inspected very close up.  The same is true with big enlargements when viewed from a more “normal” viewing distance.

The Hologon allowed focusing from 8 inches to infinity.  Considering the great depth of field rendered by such a short focal length, one might initially think focusing to be superfluous.   But it was proven that the overall performance of the Hologon could be improved if the lens was focused properly.

 
Minneapolis IDS Center
15mm Hologon

Newer, more sophisticated lens designs have improved the speed of super wide angle lenses and even allow for reflex viewing.  Subsequently, the Hologon has long been discontinued.  But it deserves credit for having been the first of the super wides, and its unusual design will always give it a special place in the history of lenses for 35mm cameras.  Those who own a Hologon can consider themselves lucky indeed.

 
Minneapolis Lumber Exchange Building
15mm Hologon

 
50mm field of view
Please note: The 50mm field of view images in this article are not separately taken photographs, they were cropped form the original Hologon negatives to present the view of a 50mm lens in conjunction with a full frame camera

 
Minneapolis IDS Center Crystal Court
15mm Hologon

 
50mm field of view

 
Minneapolis Lumber Exchange Building
15mm Hologon

 
 50mm field of view



For other articles on this blog please click on Blog Archive in the column to the right

_____________________________________________________________________

http://www.reddotcameras.co.uk/

                                   

      www.eddycam.com   

      


Buy vintage Leica cameras from 
America's premier Leica specialist 

                          
           http://www.tamarkinauctions.com/               http://www.tamarkin.com/leicagallery/upcoming-show



Click on image to enlarge


Please make payment via PayPal to GMP Photography

Click on image to enlarge
Please make payment via PayPal to GMP Photography

Click on image to enlarge
Please make payment via PayPal to GMP Photography




16 comments:

  1. I wonder if this lens would work on the current Leica digital cameras?

    ReplyDelete
    Replies
    1. That is a very good question. I have never seen any images from this lens on a digital camera. For one thing, it is doubtful that the micro lens would be able to eliminate any vignetting toward the edges and corners of the image. I am reasonable certain that the graduated filter would be an absolute necessity. But considering the extreme proximity of the rear element to the focal plane, the relative thickness of the sensor, with the Bayer filter and the micro lens stacked on top of it, might not leave enough room to mount the lens in the first place.

      Delete
  2. I find it incredible that a lens with this wide an angle of coverage could be made virtually without distortion with just three elements.

    ReplyDelete
    Replies
    1. The people at Zeiss obviously do know what they are doing.

      Delete
  3. Not that it matters, but I am curious, what Leica M camera did you use the lens on?

    ReplyDelete
    Replies
    1. No Leica M, I used a Zeiss Hologon camera for these shots.

      Delete
    2. Shouldn't that have been mentioned in the article? After all, this is a LEICA blog.

      Delete
    3. Why? We are talking about a ZEISS lens here. What difference does it make what camera it is used on?
      I should add that the Zeiss Contarex was one of the very few cameras from other manufacturers that was made to the same extremely tight tolerances as the Leica. That includes the Zeiss Hologon. Subsequently there is no difference if the Hologon lens is used on a Zeiss or Leica camera body.

      Delete
    4. What other manufacturers did apply the same tolerances?

      Delete
    5. To my knowledge, the only other 35mm cameras that were made to the same tight tolerances as Leitz/Leica and Zeiss were the Alpa cameras made in Switzerland.

      Delete
    6. I should clarify that the Zeiss cameras made as precise as the Leicas were the Zeiss Contarex cameras, not their lesser counter part, the Contaflex. As a side note: the Zeiss Contarex was the first camera to have been use in outer space.

      Delete
    7. I thought NASA used Hasselblad cameras.

      Delete
    8. They certainly did, but not exclusively. Quite a few other cameras have been used by NASA on their space flights.

      Delete
    9. Did they use any Leicas?

      Delete
    10. Why is it that the Contarex was the first camera in outer space? Isn't that contradicting, considering all the other cameras that have been used by NASA from the very beginning?

      Delete
    11. We must distinguish between spaceflights and space walks, where an astronaut leaves the confines of the space craft. The Contarex was used during the first space walk by Ed White. It was mounted onto a small, handheld maneuvering device. There are several photographs that show Ed White using the camera outside of the space craft.

      Delete